Alaabta
CTFM-SH-18 Mashiinka Samaynta Cajalad Qaade
Sinho's CTFM-SH-18 Carrier Cape Mashiinka Samaynta Cajaladda waxaa loogu talagalay in lagu isticmaalo habka samaynta toosan, mishiinkani waxa uu diyaar u yahay dhammaan codsiyada cajalado qaade kaas oo lagu soo saaray habkan. Marka hore kululaynta ka hor, ka dibna samaynta qalabka. Ugu badnaan inta lagu jiro nidaamka samaynta waa 360 mitir saacaddii, xawaaraha ugu hooseeya waa 260 mitir / saac, hagaajin fudud marka la codsado. Balaadhka samaynta waa laga bilaabo 12mm ilaa 88mm oo qoto dheer qoto dheer oo qotodheer 22mm, qoto dheer ayaa loo baahan yahay caado.
Dabacsan, fududahay in la isticmaalo, sifooyin elektaroonik ah oo horumarsan ayaa ka dhigaya CTFM-SH-18 doorasho ku habboon baahiyahaaga samaynta
Astaamaha
● Xajmiga L x W x H (cm): 300×60×166
● Miisaanka (kg): 280kg
● Xawaare Mitir/Saacaddii: 260-360 mitir/saacaddii (waxay kuxirantahay alaabta)
● Balaadhka Samaynta (mm): 12-88mm
● Qalabka la heli karo: PS, PC, PET iwm.
● Dhumucda cajalad qaadaha: 0.5mm
● Max Ko (mm) ≤22mm (Waxay u baahan tahay caado si qoto dheer KO)
● Dhexroorka gariiradda wax soo saarka: ≤600mm (lakab keliya), lakabyo badan ayaa u baahan in lagu daro mishiinka dabaysha
● Heerkulka kulaylka: 0-300℃ hagaajin joogto ah
● Dhererka gaadiidka (mm): 40-112
● Awoodda loo baahan yahay: AC110/220V, 50-60HZ
● Hawada: 8.0kg/cm² 0.7±0.1kg/cm²
● Isticmaalka Korontada: Ugu badnaan 2500W
● Heerkulka deegaanka: -5℃~40℃
Halbeegga Mashiinka Weyn
| MAYA | Walxaha | Summada | Taxane |
| 1 | PLC | Japan Mitsubishi | FX3GA |
| 2 | Shaashada taabashada | Taiwan Weinview | TK |
| 3 | Matoorka quudinta | Summada Shiinaha | 4GN |
| 4 | Matoorka duuban | Summada Shiinaha | 4GN |
| 5 | Kululaynta, Samaynta dhululubada | Taiwai CHELIC | Tiirar laba jibaaran |
| 6 | Dhululubo kale | Taiwai SHAKO | |
| 7 | Awood | Taiwan Mingwei | 350W |
| 8 | Solenoid valve | Janpan SMC | 2 daqiiqo |
| 9 | Jiid suunka | Japan panasonic servo | Match Silver KK module |
Khayraadka
| Xaashida taariikhda |