Alaabta
Cajalad fidsan oo fidsan oo polycarbonate ah
Sinho's Flat Punched Carrier Tape waxaa loo farsameeyay Hogaamiyaasha Tape-ka iyo Reel-ka iyo taayirada qaybta gariirada qayb ahaan, waxayna ku haboon tahay in loo isticmaalo inta badan SMT-ga iyo meelaha quudiyayaal. Sinho's Flat Punched Carrier Tape wuxuu diyaar u yahay in lagu soo saaro noocyo kala duwan oo boodh ah oo dhumucdiisuna tahay iyo cajalad cabbirro ah oo cad & madoow polystyrene ah, walxo polycarbonate madow, maaddada terephthalate ee polyetylen cad, iyo walxo warqad cad ah. Cajaladdan la feeray waxa lagu kala qaybin karaa gariirada SMD ee jira si loo kordhiyo dhererka loogana fogaado qashinka.
Polycarbonate (PC) Filat Punched Carrier Tape waa qalab madaw oo shaqaynaya oo ka ilaalinaya qaybaha dheecaanka korantada (ESD). Qalabkan waxaa lagu heli karaa noocyo kala duwan oo looxa ah oo dhumucdiisu tahay 0.30mm ilaa 0.60mm oo loogu talagalay cajalad ballac oo kala duwan oo laga bilaabo 4mm ilaa 88mm.
Faahfaahin
| Ka samaysan polykarbonate walxo madaw oo ka ilaalinaya ESD | Waxaa lagu heli karaa kala duwanaansho looxa oo dhumucdiisu tahay 0.30 ilaa 0.60mm | Cabbirrada la heli karo laga bilaabo 4mm ilaa 88mm | ||
| Ku habboon dhammaan quudiyeyaasha waaweyn ee SMT-doorashada iyo meelaynta | Waxaa lagu heli karaa 400m, 500m, 600m oo dherer ah | Dhererka gaarka ah waa la heli karaa |
Balacyada la heli karo
Balaadhan8-24mm kaliya leh godadka sprocket
| SO | E | PO | DO | T | |
| / | 1.75 ±0.10 | 4.00 ±0.10 | 1.50 +0.10/-0.00 | 0.30 ±005 | |
| 12.00 ±0.30 | / | 1.75 ±0.10 | 4.00 ±0.10 | 1.50 +0.10/-0.00 | 0.30 ±005 |
| 16.00 ±0.30 | / | 1.75 ±0.10 | 4.00 ±0.10 | 1.50 +0.10/-0.00 | 0.30 ±005 |
| 24.00 ±0.30 | / | 1.75 ±0.10 | 4.00 ±0.10 | 1.50 +0.10/-0.00 | 0.30 ±005 |
Guryaha caadiga ah
| Noocyada | SINHO | |
| Midabka | Madow | |
| Qalab | Polycarbonate (PC) Waxqabad | |
| Balaadhka Guud | 8mm, 12mm, 16mm, 24mm, 32mm, 44mm, 56mm, 72mm, 88mm; | |
| Dhumucda | 0.3mm, 0.4mm, 0.5mm, 0.6mm ama dhumuc kale oo loo baahan yahay | |
| Dhererka | 400M, 500M, 600M ama dhererka caadooyinka kale |
Guryaha Alaabta
| Guryaha Jirka | Habka tijaabada | Unug | Qiimaha |
| Cufis-jiidad gaar ah | ASTM D-792 | g/cm3 | 1.25 |
| Yaraanta caaryada | ASTM D955 | % | 0.4-0.7 |
| Guryaha Makaanikada | Habka tijaabada | Unug | Qiimaha |
| Xoogga Jilicsan | ASTM D638 | Mpa | 65 |
| Xoog Jilicsan | ASTM D790 | Mpa | 105 |
| Modulus Flexural | ASTM D790 | Mpa | 3000 |
| Xoojinta Saamaynta Izod-ka ee La Dareemay (3.2mm) | ASTM D256 | J/m | 300 |
| Guryaha kulaylka | Habka tijaabada | Unug | Qiimaha |
| Tusmada socodka dhalaalka | ASTM D1238 | g/10 daqiiqo | 4-7 |
| Guryaha Korontada | Habka tijaabada | Unug | Qiimaha |
| Dusha iska caabinta | ASTM D-257 | Ohm/sq | 104~5 |
| Guryaha Dabka | Habka tijaabada | Unug | Qiimaha |
| Qiimaynta Ololka @ 3.2mm | Gudaha | NA | NA |
| Shuruudaha Habaynta | Habka tijaabada | Unug | Qiimaha |
| Heerkulka Foosto | | °C | 280-300 |
| Caaryada Heerkulka | | °C | 90-110 |
| Heerkulka qallajinta | | °C | 120-130 |
| Waqtiga qallajinta | | Saacad | 3-4 |
| Cadaadiska Durida | MED-sare | ||
| Cadaadis Qabo | MED-sare | ||
| Xawaaraha isku dubaridka | DHEXDHEXAAD | ||
| Cadaadiska Dhabarka | HOOSE | ||
Nolosha shelf iyo Kaydinta
Alaabta waa in lagu isticmaalo 1 sano gudahood laga bilaabo taariikhda la soo saaray. Ku kaydi baakaddeedii asalka ahayd jawiga cimilada lagu xakameeyo halkaasoo heerkulku u dhaxeeyo 0 ~ 40℃, qoyaan qaraabo ah <65%RHF. Alaabtan waxaa laga ilaaliyaa iftiinka qorraxda tooska ah
Camber
Buuxiyay heerka EIA-481 ee camber aan ka badnayn 1mm ee dhererka 250 milimitir.
Khayraadka
| Qalabka Jirka ee Agabka | sawirid |
| Badbaadada la Tijaabiyay Warbixinada |
